Home > Communication Cables > Low-voltage SWA Armoured Cable: Specifications and Selection Guide

Low-voltage SWA Armoured Cable: Specifications and Selection Guide

Author: Evelyn w

Nov. 18, 2026

11 0

Low-Voltage SWA Armoured Cable: Specifications and Selection Guide

Low-voltage SWA armoured cable is a power cable with steel wire armour designed to provide mechanical protection as well as electrical insulation. Buyers typically specify it by voltage rating, conductor material and cross-section, core count, insulation and sheath materials, and installation conditions. A common low-voltage designation is 0.6/1 kV, but the correct construction depends on the project specification and applicable standards. Use this guide to compare options, prepare an accurate inquiry, and confirm the cable is suitable for the intended route and load.

You can find more information on our web, so please take a look.

Who This Guide Is For

This guide is for electrical contractors, project engineers, distributors, and procurement teams sourcing armoured power cable for commercial, industrial, or infrastructure projects. It is also useful for buyers comparing supplier quotations that use different descriptions for similar cable constructions. Our focus is on the specification decisions that affect suitability, installation, and sourcing. Final selection should be checked against the project design and local electrical requirements.

How Low-Voltage SWA Cable Is Constructed

SWA means steel wire armour. In a typical construction, insulated conductors are laid together, covered by an inner bedding layer, protected by steel wires, and finished with an outer sheath. The conductor may be copper or aluminium, while insulation and sheath materials vary with the required electrical, environmental, and installation performance. The exact layer sequence and materials should be confirmed in the cable datasheet rather than inferred from the name alone.

What the Armour Does—and Does Not Do

The steel wire armour provides mechanical protection against certain external stresses and can support installation in environments where an unarmoured cable may be unsuitable. It does not eliminate the need to assess impact risk, cable routing, support, or protection at terminations. Armour earthing and bonding arrangements must also follow the applicable design rules. SWA is not automatically the right choice for every buried, wet, corrosive, or hazardous-area installation.

Types, Materials, and Common Specification Options

Conductor Material and Core Count

Copper conductors are commonly selected where conductivity, compactness, or established project practice is important. Aluminium can be considered where conductor weight or material cost is a priority, but its electrical sizing and termination requirements differ from copper. Core configurations may include two, three, four, or more cores depending on the circuit and system design. Specify whether a protective earth core is required or whether the design uses the armour or a separate conductor for that purpose.

Insulation, Bedding, Armour, and Sheath

XLPE insulation is a common option for low-voltage power cable, while PVC and other materials may be specified for insulation, bedding, or outer sheathing. A typical XLPE cable may have a stated maximum conductor operating temperature of 90°C under defined conditions; actual allowable loading depends on the cable standard, installation method, ambient conditions, and manufacturer’s data. Galvanized steel wire is commonly used for the armour, but construction details should be verified for the selected cable. Ask the supplier to identify each layer and its material in the technical submittal.

Key Specifications to Confirm

Do not request a quote using only the phrase “low-voltage SWA cable.” A complete specification helps suppliers quote the same product and helps your engineering team assess compliance. The following table provides a practical checklist; values should come from the project design rather than being assumed.

Specification What to state or verify
Voltage rating For example, 0.6/1 kV where appropriate to the system and governing specification.
Conductor Copper or aluminium, conductor class, and cross-sectional area in mm².
Core arrangement Number of cores, core identification, and whether a separate earth core is required.
Construction Insulation, bedding, armour, and outer sheath materials and colours.
Applicable standard Required national or international standard and any project-specific additions.
Installation conditions Route, burial or tray method, exposure, temperature, grouping, and termination details.
Supply format Required length, drum or coil preference, marking, packaging, and delivery destination.

Conductor sizes such as 2.5 mm², 4 mm², and 6 mm² are examples of nominal cross-sections that may appear in low-voltage cable schedules; they are not universal recommendations for a given load. Correct sizing requires electrical calculations, including current demand, voltage drop, fault conditions, installation method, and relevant derating factors. A cable’s size and current-carrying capacity should never be selected from a general product description alone.

Match the Cable to the Application

Typical Project Contexts

Low-voltage SWA cable may be considered for fixed power distribution in industrial facilities, commercial buildings, outdoor equipment feeds, and other installations where mechanical protection is part of the design. The final choice depends on the cable route and the environment, not simply the type of building. For example, exposure to moisture, chemicals, sunlight, or corrosive conditions may affect sheath selection and protective measures. Confirm suitability with the project engineer and the cable manufacturer.

Installation and Design Checks

Before ordering, verify the route length, installation method, expected load, and termination equipment. Confirm bend limits, pulling requirements, gland compatibility, and armour bonding with the selected cable’s manufacturer documentation and installation plan. Where a cable will be buried, also assess the need for ducts, warning systems, or additional protection under local rules. If the project involves unusual environmental or safety conditions, obtain a written technical review before approval.

A Practical Selection Framework

  1. Define the electrical duty. Record system voltage, load, circuit length, fault requirements, and any design constraints. Have a qualified designer confirm conductor size and protection coordination.

  2. Describe the installation environment. Identify whether the cable is installed indoors, outdoors, on tray, in duct, or underground. Note relevant exposure to water, chemicals, heat, sunlight, and mechanical damage.

    Zhongdong Cable Co., Ltd. are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

  3. Specify the complete construction. State conductor material and size, cores, insulation, bedding, armour, sheath, colour, and required standard. Where the specification allows alternatives, ask suppliers to list deviations clearly.

  4. Check accessories and delivery details. Confirm glands, lugs, drum lengths, cutting tolerances, marking, and packaging requirements. These details can affect installation planning and total project cost.

  5. Review the submittal before purchase. Compare the quotation with the requested specification and request a datasheet and relevant product documentation. Resolve any difference in materials, standards, or delivery scope before placing the order.

Pricing, MOQ, and Lead Time

Pricing for SWA cable is influenced by conductor material and size, core count, cable construction, order quantity, and the cost of raw materials. Required standards, custom marking, non-standard drum lengths, and packaging can also affect a quotation. Minimum order quantities and production or delivery lead times vary by specification, quantity, and current production schedule. For planning purposes, request these terms with the quote rather than relying on a generic estimate.

Supplier Evaluation Checklist

A reliable supplier should be able to explain the proposed construction and identify how it matches your inquiry. Ask for a datasheet, manufacturing standard, conductor and insulation details, and any available inspection or quality documents relevant to the order. Compare technical compliance separately from price so that a lower quotation does not conceal a material or construction difference. Confirm quotation validity, delivery basis, packing, and the process for handling specification changes.

How Zhongdong Cable Co., Ltd. Can Support Your Inquiry

At Zhongdong Cable Co., Ltd., we support B2B buyers sourcing communication and power cable products by reviewing the requested cable description and clarifying the information needed for a comparable quotation. Share your cable schedule, required standards, conductor details, installation context, quantity, and destination so we can assess the inquiry accurately. We can discuss available construction options and provide product information for your technical review, subject to the confirmed order specification. Please have your engineering team approve the final cable selection before procurement.

Key Takeaways and Next Steps

  • Specify low-voltage SWA cable by its complete construction, not by the armour type alone.

  • Confirm voltage rating, conductor material and size, core count, insulation, sheath, standard, and installation conditions.

  • Use project calculations and manufacturer documentation to verify electrical sizing, installation limits, and accessory compatibility.

  • Request a quotation that clearly states price basis, MOQ, lead time, delivery details, and any deviations from your specification.

In short, the right low-voltage SWA armoured cable is the one that meets the project’s electrical, environmental, mechanical, and compliance requirements as a complete assembly. Prepare a detailed cable schedule, have the design reviewed, and compare supplier submittals against the same criteria. To discuss a sourcing requirement with Zhongdong Cable Co., Ltd., send us the specification, quantity, and delivery destination for review and quotation.

Are you interested in learning more about Low-voltage SWA Armoured Cable? Contact us today to secure an expert consultation!

Comments

0